This set of five woodcarving tools is designed to help beginners make a start in the absorbing craft of woodcarving, using quality tools. This set is from the Henry Taylor Tools range, manufactured in Sheffield, UK from high carbon steel, hand forged, hardened and tempered to ensure a durable product capable of being brought to a fine, sharp cutting edge. The tools included in the set are as follows:
#1 sweep straight chisel, 6mm
#3 sweep shallow straight gouge, 6mm
#5 sweep shallow straight gouge, 8mm
#6 sweep straight gouge, 6mm
#8 sweep straight gouge, 8mm
The blades are approx. 85mm long. The tools are fitted with octagonal beech handles approx. 115mm long and 25mm diameter.
These tools are designed for use by hand (or gently with a carver's mallet) and incorporate a bolster between blade and handle to absorb the thrust forces generated in use. Blades are non-reflective black outside and straw colour within the flute (where applicable).
Though these tools are supplied sharpened and honed, we would always advise that any edge tool should be sharpened and honed by the user prior to first use. (Only you can possibly know exactly how you like your tools sharpened - and only you have the ultimate responsibility and interest in ensuring that they are fully prepared for your use).
The set is packaged with an instruction sheet which gives details of a suggested starter carving project and decribes the process of making this relief carving project from a suitable blank of Lime approximately 255mm x 180mm x 25mm (10 x 7 x 1 inches). (Timber is NOT supplied in the set but we can help with supply if you contact The ToolPost).
Hand Forged Steel Wood Working Tools for Wood Carving and Woodturning; High Speed Steel Tools and Carbon Steel Tools from Henry Taylor.
Diamic brand woodturning tools have been produced in Sheffield by skilled craftsmen, from the finest steel for more than one hundred and fifty years. The manufacturer of these tools marries traditional hand crafting and forging skills with modern heat treatment and finishing techniques to give the quality of design, finish and edge retaining properties demanded by woodturners of today. Stringent control ensures that the best steel is selected. Each tool is carefully forged, correctly hardened and tempered, then hardness-tested to guarantee edge retention.
Acorn carving tools are world renowned and have been made by Henry Taylor Tools since 1834, combining the traditional pride and skills of those far off days with the aids of modern technology. Only the best quality steel is used, coupled with advanced heat treatment, to ensure that the finest of cutting edges is not only achieved but also maintained.