A set of flat bit drills containing 13 pieces for drilling holes in wood from 6mm to 25mm diameter. These are useful 'handyman' tools which work well in both side- and end-grain timbers, especially softwoods ('deal') as used in construction and DIY. The shanks on these examples are 1/4 inch hexagon designed to fit into drill/driver tools providing a non-slip interface to the power tool. They can also be used in a hand brace, provided a degree of feed pressure can be applied, but are at their best used in a low-speed power drill. The set is presented in a smart, stiffened, robust, nylon carrying case with a Velcro closure.
Cutting diameters: 6; 8; 10; 11; 13; 14; 16; 18; 19; 20; 22; 24; and 25mm respectively
Cutting length: 100mm
Shank diameter (minimum chuck capacity reqd.): 1/4 inch hexagon with locking groove for drill/driver use
Overall length: 150mm
All dimensions are approximate and given for general guidance only. Subject to change without notice.
Distributors of a range of engineering tools, including Bondhus hex and Torx wrenches