Hunter Tool

Hunter Tool Company is known as an outstanding tool supplier of tools for hollowing work

The Hunter Tool uses a very fine grain of carbide specifically engineered to meet the sharptooling requirements demanded by the woodturning community.

While proficient in rough turning operations, Hunter Tools excel best when used as a finishing tool for final shaping and the light finish cuts. Often the tedious sanding operations are either eliminated or greatly reduced.

Carbide tools had been tried before in woodturning, but no-one previously seemed to have recognised that whilst carbide is very tough and highly wear resistant is is capable - normally - of being brought to only a moderately sharp edge. Key to the Hunter development was to apply the micro-fine diamond finishing process to the carbide tips to bring them to a sharpness comparable with that of conventional turning tool material, but with the added plus of long edge-holding and incredible wear resistance. 

True, these "jewels" of the carbide industry cost a little more than ordinary tips but it won't take mentions of silk purses and sow's ears to make you realise that the little extra is what makes these the only tips worth considering for woodturning. Sure, you can create "wood-shovels" with ordinary carbide tips, but you can't create what any self-respecting woodturner would call a turning tool capable of fine finishing as well as excavator-scale rates of material removal.

#3 Hunter tool, 10mm cutter, on 3/8in shaft with wood handle

Brand:
Hunter Tool
Part Number:
HT3001
£84.82 inc VAT£70.68 excl VAT

#3 Hunter tool, 10mm dia. cutter, on 3/8in shaft w/o handle

Brand:
Hunter Tool
Part Number:
HT3002
£66.96 inc VAT£55.80 excl VAT

#3 Hunter swan-neck tool, 10mm cutter, 3/8in shaft, wood hdl

Brand:
Hunter Tool
Part Number:
HT3003
£107.14 inc VAT£89.28 excl VAT

#3 Hunter swan-neck tool, 10mm cutter, 3/8in shaft w/o hdle

Brand:
Hunter Tool
Part Number:
HT3004
£89.29 inc VAT£74.41 excl VAT

#5 Hunter JC tool, 10mm cutter, 5/8in shaft, wood handle

Brand:
Hunter Tool
Part Number:
HT5001
£101.98 inc VAT£84.98 excl VAT

#5 Hunter JC tool, 10mm cutter, 5/8in shaft, without handle

Brand:
Hunter Tool
Part Number:
HT5002
£93.47 inc VAT£77.89 excl VAT

#5 Swan-neck JC tool, 10mm cutter, 5/8in shaft, wood handle

Brand:
Hunter Tool
Part Number:
HT5003
£118.98 inc VAT£99.15 excl VAT

#5 Swan-neck JC tool, 10mm cutter, 5/8in shaft, unhandled

Brand:
Hunter Tool
Part Number:
HT5004
£110.47 inc VAT£92.06 excl VAT

#5 Outboard Swan-neck JC tool, 10mm cutter, 5/8in shaft

Brand:
Hunter Tool
Part Number:
HT5005
£118.98 inc VAT£99.15 excl VAT

#5 Outboard Swan-neck JC tool, 10mm, 5/8 shaft, no handle

Brand:
Hunter Tool
Part Number:
HT5006
£110.47 inc VAT£92.06 excl VAT

Hunter 10 mm (#3) cutter and stem to upgrade BCT Supercut 2.

Brand:
Hunter Tool
Part Number:
HT24925-10
£53.52 inc VAT£44.60 excl VAT

Hunter Hercules #3 tool (5/8" square bar), wood handle

Brand:
Hunter Tool
Part Number:
HTHERC
£107.14 inc VAT£89.28 excl VAT

Hunter Hercules #3 tool, unhandled (5/8 shaft)

Brand:
Hunter Tool
Part Number:
HTHERCUH
£89.29 inc VAT£74.41 excl VAT

Hunter Hercules #1 tool (3/8" square bar), wood handle

Brand:
Hunter Tool
Part Number:
HTMHERC
£107.14 inc VAT£89.28 excl VAT

Hunter Hercules #1 tool, unhandled (3/8 shaft)

Brand:
Hunter Tool
Part Number:
HTMHERCUH
£89.29 inc VAT£74.41 excl VAT

Hunter 3/8" bore aluminium tool handle (single-ended)

Brand:
Hunter Tool
Part Number:
HTH38
£42.48 inc VAT£35.40 excl VAT

Hunter 6 mm (#1) cutter and stem to upgrade BCT Supercut 2.

Brand:
Hunter Tool
Part Number:
HT24925-6
£53.52 inc VAT£44.60 excl VAT RRP: £57.50, you save £3.98

Hunter #1 Osprey carbide tipped Versagouge, handled, 6mm tip

Brand:
Hunter Tool
Part Number:
HTOSP1
£98.21 inc VAT£81.84 excl VAT

Hunter #1 Osprey carbide tip Versagouge, unhandled, 6mm tip

Brand:
Hunter Tool
Part Number:
HTOSP1UH
£80.36 inc VAT£66.97 excl VAT

Hunter #2 Osprey carbide tipped Versagouge, handled. 8mm tip

Brand:
Hunter Tool
Part Number:
HTOSP2
£100.00 inc VAT£83.33 excl VAT

Hunter #2 Osprey carbide tip Versagouge, unhandled, 8mm tip

Brand:
Hunter Tool
Part Number:
HTOSP2UH
£82.14 inc VAT£68.45 excl VAT

Hunter Tools #1 Taper box hollower, straight

Brand:
Hunter Tool
Part Number:
HT1301
£80.36 inc VAT£66.97 excl VAT

Hunter Tools #1 C Hooked box hollower (horizontal cutter)

Brand:
Hunter Tool
Part Number:
HT1302
£80.36 inc VAT£66.97 excl VAT

Hunter Tools #1 Back cut tool for box hollowing (skew tip)

Brand:
Hunter Tool
Part Number:
HT1303
£80.36 inc VAT£66.97 excl VAT
Showing 1 to 24 of 34 (2 pages)