|
|
 |
DB800 Woodturning Lathe |
|
|
|
|
 |
|
|
|
The Wivamac DB800 is a bench-mounted lathe designed to be accommodated in the smaller workshop. Not that this is a "small" lathe in either
capacity or capability sharing, as it does, the massive 260 mm centre height of its bigger cousins and being compatible with most of the vast range of accessories
available to extend the capability of these lathes beyond most imaginations. For sure it is a compact design, which utilises space brilliantly, but it will not limit your creativity in the way that so many conventionally "small" lathes might. In spindle turning applications, the DB800 will accommodate 820 mm between centres.
Although the smallest lathe in the DB range, the DB800 does not compromise on drive choice with both single- and three-phase versions driving through a four speed poly-vee-belt drive system available. More
advanced users, requiring a variable speed control system, are catered for by the DB800 vario version as well as the companion DB801/DB802vario lathes.Take a look through the specifications, below, or browse the more comprehensive component descriptions provided and see what a "real" lathe could bring to your world! When you are ready to place your order, the facility is just a click away, lower down this page. |
|
|
|
Wivamac DB800 Lathe Technical Specifications |
|
Capacity (between centres) |
820 mm / 32.25" |
Capacity (diameter over bed) |
520 mm / 20.47" |
Centre Height (over bed) |
260 mm / 10.23" |
Spindle |
Diameter |
30 mm / 1.18" |
Morse taper |
2 MT |
Throat bore |
10 mm / 0.39" |
Thread |
M33 x 3.5mm |
Indexing |
24 position indexing with positive pin location |
Spindle Lock |
Yes: independent pin locking directly into spindle |
Tailstock |
Diameter |
30 mm / 1.18" |
Morse taper |
2 MT |
Throat bore |
14 mm / 0.55" |
Quill travel |
95 mm / 3.74" |
Motor |
750 W / 1 HP, 1440 rev/min |
Drive Speeds |
Standard Drive
(4 - speed pulley) |
Vario Drive
(4 step pulley) |
480 |
120 - 480 |
800 |
240 - 960 |
1500 |
450 - 1800 |
2500 |
750 - 3000 |
Dimensions (L x W x H) |
1600 x 400 x 560 mm / 62.99" x 15.75" x 22.05" |
Weight (without ballast) |
105kg / 232 lbs |
|
|
|
|
Wivamac DB800 Lathe Selection Chart & Order Form |
|
Use this table to select the most suitable lathe model and acessories to suit your needs. Click in the box in
the rightmost column to add an item to your configuration (click it again if you wish to remove the item). At all times the price* of the chosen configuration will be displayed in the
box at the foot of the table. You may choose to pay for your lathe outright for processing immediately, or place a holding deposit of 10% with the balance of charges being paid prior to
delivery. The relevant deposit payable is also shown at the foot of this table. Links in the left-hand column provide further details of some items. |
|
Ref. |
Description |
*Price (£) |
ü
to
Add |
Woodturning lathes have M33 x 3.5 mm threaded spindle, bored 2 MT, tailstock bored 2
MT, and are supplied complete with 4-prong drive centre; live tail centre, 8 mm dia. knock-out bar; 300 mm cast iron toolrest mounted in variable offset banjo; indexing and locking pin, toolkit and Users
Manual. The lathe headstock is fully free to swivel and traverse the lathe bed for optimum positioning to suit any job. |
DB800m |
Woodturning lathe, bench-mounted, 820 mm centres, centre height 260 mm, 220 volt 1
Ph. 0.75 kW (1 HP) motor driving through 4-speed poly-vee-belt drive. |
£1313.79 |
|
DB800d |
Woodturning lathe, bench-mounted, 820 mm centres, centre height 260 mm, 220/380 volt 3 Ph. 0.75 kW (1 HP) motor
driving through 4-speed poly-vee-belt drive. |
£1277.41 |
|
DB800vario |
Woodturning lathe, bench-mounted, 820 mm centres, centre height 260 mm, 0.75 kW (1 HP) motor with VARIO electronic
variable speed control driving through 4-speed poly-vee-belt drive. |
£1682.54 |
|
DB800vario
CB |
Woodturning lathe, bench-mounted, 820 mm centres, centre height 260 mm, 0.75 kW (1 HP) motor with VARIO electronic
variable speed control driving through 4-speed poly-vee-belt drive. Also includes magnetic-backed remote control panel housing principal controls. |
£1750.34 |
|
Accessories |
DB8100 |
Optional, height-adjustable floor stand to suit DB801/DB800, fabricated from heavy gauge steel, A -frame design, bolts directly under bed. As used on DB1000/1200 |
£222.41 |
|
DB1020S |
Bowl turning attachment giving up to 1000 mm diameter over-bed turning capacity. Used with headstock rotated through
90 degrees. Bench mounted lathes must be mounted at standard height to be compatible with this attachment. |
£205.05 |
|
DB0010 |
Headstock alignment system, facilitating aligning head- and tail-stock. |
£37.21 |
|
DB1210-1" |
Offset extension adaptor for tool rest, 1" socket. |
£37.21 |
|
DB1220
|
Three-point steady, fully adjustable. |
£189.34 |
|
DB1240
|
Sphere turning jig, c/w centre finder and HSS cutter. For creating spheres up
to 190 mm diameter. |
£222.41 |
|
DB1240HR |
Sphere turning jig, c/w centre finder and gouge-profile cutter. For creating spheres up to 190 mm diameter.
|
£263.75 |
|
DB1241 |
Sphere turning jig, with micro-adjustment; c/w centre finder and HSS cutter. For creating spheres up to 190 mm
dia. |
£311.70 |
|
DB1270-1" |
Camlock toolrest bracket ("banjo"), cast, with variable eccentricity
toolpost socket. - supplied as standard equipment. For 1" stem toolrests. |
£173.63 |
|
DB1261-1" |
Toolrest, 150 mm, cast iron, 1" stem |
£36.38 |
|
DB1262-1" |
Toolrest, 300 mm, cast iron, 1" stem- supplied as standard equipment. |
£36.38 |
|
DB1263-1" |
Toolrest, 600 mm, steel, dual post design, 1" stem.(requires additional DB1260-1"
toolrest bracket) |
£66.97 |
|
DB1264-1" |
Internal bowl turning toolrest, fabricated steel "J"-shape, 1" stem |
£33.07 |
|
DB1251-1" |
Toolrest, 100 mm , steel, 1" stem |
£44.65 |
|
DB1254-1" |
Toolrest, 250 mm , steel, 1" stem |
£46.30 |
|
Compound Table & Ornamental Turning System |
DB1410 |
Compound Table with toolrest socket |
£238.95 |
|
DB1420 |
Ornamental turning device comprising cutter head with toolholder for spindle
mounting and indexable auxilliary spindle, threaded M33 x 3.5 mm for mounting in toolrest socket. |
£208.35 |
|
DB1430 |
Thread cutting jig to mount in toolrest socket, spindle threaded M33 x 2 mm pitch,
c/w 60 deg. TC cutter, 8 mm shank. |
£124.02 |
|
DB1440 |
Tool support, bored 43 mm dia. To clamp onto standard 43 mm collar on routers and
power drills. Mounts in toolrest socket. |
£30.59 |
|
GSG2175 |
Alternate leadscrew for DB1430, 1.75 mm pitch. |
£24.80 |
|
GSG2250 |
Alternate leadscrew for DB1430, 2.5 mm pitch. |
£24.80 |
|
GSG2350 |
Alternate leadscrew for DB1430, 3.5 mm pitch. |
£38.03 |
|
TPC3412 |
3/4" x 60 deg., 3/8 inch shank, 12 tooth cobalt HSS threading cutter for DB1430 |
£20.67 |
|
GSG201 |
19 mm x 60 deg., 8 mm shank, 3-lobed TC threading cutter for DB1430 |
£28.94 |
|
GSG2150 |
Replacement cutter tip for GSG201 cutter |
£19.84 |
|
GSG200 |
Stand-alone threading device utilising DB1430 on free-standing base unit. Requires router with 8 mm collet and
43 mm diameter mounting collar (not supplied). |
£349.74 |
|
|
|
|
|
You can choose to pay for your lathe in full, right away, or place a 10% holding deposit. Click the
appropriate button, below, to indicate your choice and place this configuration in your shopping basket (that's one big basket!) |
|
|
|
10% Deposit on this lathe £ |
|
|
|
|
|
NB: Prices quoted in pounds sterling (£).
*Value Added Tax will be added to invoices to EU residents |
|
|
|
|
|
©1997-2008 P. Hemsley. The information on this website is the copyright property of Peter Hemsley. Coeur du Bois and The
ToolPost are trading styles of Peter Hemsley. Whilst reasonable efforts are made to ensure the accuracy of information presented, no liability can be accepted for errors in this information nor for
contingencies arising therefrom. If you are inexperienced in any aspect of woodworking, we would strongly counsel that you take a course of formal instruction before commencing to practice |
|