|
|
 |
|
|
 |
|
|
|
Top of the DB line-up is the DB1200 lathe offering up to 1200 mm (48") between centres and 260 mm (10.5") centre height over the bed. The
DB1200 follows the same general construction principles as the DB1000 but is even more massive in the materials of its construction: with a deeper bed, larger section legs and more widely-spaced headstock bearings
in the enlarged headstock.. The DB1200 features a large diameter spindle with substantial industrial bearings, widely spaced to minimise and effectively distribute the loads imposed by turning. As with
the other lathes in this series, the headstock can both rotate to give clear access for turning large diameter items, and can be positioned anywhere within the length of the bed to allow optimal access to the
workpiece within the "geography" of your workplace. The massive capacity over the bed, in excess of a half meter diameter, is extended to over two metres when using the headstock rotated to permit turning over
the floor - an operation aided by the optional bowl turning attachment. For a more compact version of this lathe, see the DB6000 lathe.The choice of drive systems provides either a three-phase motor driving
through a five-speed pulley system or, for optimum performance and flexibility, this same five-speed system driven by the excellent Vario electronic variable speed system giving infinitely variable speed over the
complete speed range (see specifications). A more
comprehensive review of the features of this lathe is available in the Technical Specifications section of the website. A table of specifications also appears below. This lathe can also form the foundation of sophisticated woodturning work-centre with accessories for copy-turning, fluting and ornamental turning
all available. No other manufacturer supplying lathes today offers such a comprehensive range of accessories and equipment with which to enhance a basic lathe, extending its capabilities further than most of us can even imagine.
Built in Belgium, to the highest standards, by a dedicated and caring producer, these lathes represent the pinnacle of woodturning ambition for the serious enthusiast and professional woodturner. |
|
|
|
Wivamac DB1200 Lathe Technical Specifications |
|
Capacity (between centres) |
1200 mm |
Capacity (diameter over bed) |
520 mm / 20.47" |
Centre Height (over bed/floor) |
260 mm / 10.23" (1150 mm / 45.25") |
Spindle |
Diameter |
40 mm / 1.57" |
Morse taper |
2 MT |
Throat bore |
10 mm / 0.39" |
Thread |
M33 x 3.5 mm |
Indexing |
24 position indexing with positive pin location |
Spindle Lock |
Yes: independent pin locking directly into spindle |
Tailstock |
Diameter |
40 mm / 1.57" |
Morse taper |
2 MT |
Throat bore |
10 mm / 0.39" |
Quill travel |
110 mm / 4.33" |
Motor |
1.5kW / 2 HP or 2.25kW / 3 HP, 1440 rev/min |
Drive Speeds |
Standard Drive |
Vario Drive |
(5 - speed pulley) |
(5 step pulley) |
300 |
90 - 300 |
750 |
225 - 750 |
1200 |
360 - 1200 |
1960 |
580 - 1960 |
3000 |
900 - 3000 |
Dimensions (L x W x H) |
2150 x 790 x 1260 mm / 84.65" x 31.1" x 49.61" |
Weight (without ballast) |
195 kg / 430 lbs |
|
|
|
|
Wivamac DB1200 Lathe Selection Chart & Order Form |
|
Use this table to select the most suitable lathe model and acessories to suit your needs. Click in the box in
the rightmost column to add an item to your configuration (click it again if you wish to remove the item). At all times the price* of the chosen configuration will be displayed in the
box at the foot of the table. You may choose to pay for your lathe outright for processing immediately, or place a holding deposit of 10% with the balance of charges being paid prior to
delivery. The relevant deposit payable is also shown at the foot of this table. Links in the left-hand column provide further details of some items. |
|
Ref. |
Description |
*Price (£) |
ü
to
Add |
Woodturning lathes have M33 x 3.5 mm threaded spindle with 24 position indexing,
bored 2 MT, cast iron heavy-duty tailstock bored 2 MT, and are supplied complete with 4-prong drive centre; live tail centre, spindle equipment ejector/thread guard, 300 mm cast iron toolrest mounted in
variable offset banjo; spindle locking pin, toolkit and Users Manual. The lathe headstock is fully free to swivel and traverse the lathe bed for optimum positioning to suit any job. |
DB1200d |
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 1200 mm centres, centre height 260 mm/1150 mm
over floor, 220/380 volt 3 Ph. 1.5 kW (2 HP) motor, 5-speed poly-vee-belt drive and reversing switch. |
£1982.67 |
|
DB1200d-3 |
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 1200 mm centres, centre height 260 mm/1150 mm
over floor, 220/380 volt 3 Ph. 2.25 kW (3 HP) motor, 5-speed poly-vee-belt drive and reversing switch. |
£2040.54 |
|
DB1200vario |
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 1200 mm centres, centre height 260 mm/1150 mm
over floor, 220 volt 1 Ph. 1.5 kW (2 HP) motor with VARIO electronic variable speed control, 5-speed poly-vee-belt drive. Vario controller installed in steel cabinet mounted on inner face of left
hand pedestal of lathe bed. |
£2472.96 |
|
DB1200vario CB |
Woodturning lathe, as DB1200vario above, but with major controls mounted in magnetically-backed remote
control panel. |
£2540.76 |
|
DB1200
vario3
|
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 1200 mm centres, centre height 260 mm/1150 mm
over floor, 220 volt 1 Ph. 2.25 kW (3 HP) motor with VARIO electronic variable speed control, 5-speed poly-vee-belt drive. Vario controller installed in steel cabinet mounted on inner face of left
hand pedestal of lathe bed. |
£2670.56 |
|
DB1200
vario3CB |
Woodturning lathe, as DB1200vario3 above, but with major controls mounted in magnetically-backed remote control panel.
|
£2738.36 |
|
Accessories |
DB1020S
|
Bowl Turning Attachment for DB1000/DB1200 providing supplementary underslung bed perpendicular to main bed for easier
access to larger workpieces (up to ~1000mm/40" dia.) when working with the headstock rotated. Includes adjustable front leg, toolpost extender and mounting hardware. |
£205.05 |
|
DB0010 |
Headstock alignment system, facilitating aligning head- and tail-stock. |
£31.42 |
|
DB1210-1" |
Offset extension adaptor for tool rest, 1" socket. |
£37.21 |
|
DB1220
|
Three-point steady, fully adjustable. |
£189.34 |
|
DB1240
|
Sphere turning jig, c/w centre finder and HSS cutter. For creating spheres up
to 190 mm diameter. |
£222.41 |
|
DB1240HR |
Sphere turning jig, c/w centre finder and gouge-profile cutter. For creating spheres up to 190 mm diameter.
|
£263.75 |
|
DB1241 |
Sphere turning jig, with micro-adjustment; c/w centre finder and HSS cutter. For creating spheres up to 190 mm
dia. |
£311.70 |
|
DB1270-1" |
Camlock toolrest bracket ("banjo"), with variable stem offset facility,
steel. - supplied as standard equipment. For 1" stem toolrests. |
£173.63 |
|
DB1261-1" |
Toolrest, 150 mm, cast iron, 1" stem |
£36.38 |
|
DB1262-1" |
Toolrest, 300 mm, cast iron, 1" stem- supplied as standard equipment. |
£36.38 |
|
DB1263-1" |
Toolrest, 600 mm, steel, dual post design, 1" stem.(requires additional DB1260-1"
toolrest bracket) |
£66.97 |
|
DB1264-1" |
Internal bowl turning toolrest, fabricated steel "J"-shape, 1" stem |
£33.07 |
|
DB1251-1" |
Toolrest, 100 mm , steel, 1" stem |
£44.65 |
|
DB1254-1" |
Toolrest, 250 mm , steel, 1" stem |
£52.09 |
|
Compound Table & Ornamental Turning System |
DB1410 |
Compound Table with toolrest socket |
£238.95 |
|
DB1420 |
Ornamental turning device comprising cutter head with toolholder for spindle
mounting and indexable auxilliary spindle, threaded M33 x 3.5 mm for mounting in toolrest socket. |
£208.35 |
|
DB1430 |
Thread cutting jig to mount in toolrest socket, spindle threaded M33 x 2 mm pitch,
c/w 60 deg. TC cutter, 8 mm shank. |
£124.02 |
|
DB1440 |
Tool support, bored 43 mm dia. To clamp onto standard 43 mm collar on routers and
power drills. Mounts in toolrest socket. |
£30.59 |
|
GSG2175 |
Alternate leadscrew for DB1430, 1.75 mm pitch. |
£24.80 |
|
GSG2250 |
Alternate leadscrew for DB1430, 2.5 mm pitch. |
£24.80 |
|
GSG2350 |
Alternate leadscrew for DB1430, 3.5 mm pitch. |
£38.03 |
|
TPC3412 |
3/4" x 60 deg., 3/8 inch shank, 12 tooth cobalt HSS threading cutter for DB1430 |
£20.67 |
|
GSG201 |
19 mm x 60 deg., 8 mm shank, 3-lobed TC threading cutter for DB1430 |
£28.94 |
|
GSG2011 |
Replacement cutter tip for GSG201 cutter |
£19.84 |
|
GSG200 |
Stand-alone threading device utilising DB1430 on free-standing base unit. Requires router with 8 mm collet and
43 mm diameter mounting collar (not supplied). |
£349.74 |
|
|
|
|
|
You can choose to pay for your lathe in full, right away, or place a 10% holding deposit. Click the
appropriate button, below, to indicate your choice and place this configuration in your shopping basket (that's one big basket!) |
|
|
|
10% Deposit* on this lathe £ |
|
|
|
|
|
NB: Prices quoted in pounds sterling (£).
*Value Added Tax will be added to invoices to EU residents |
|
|
|
|
|
©1997-2008 P. Hemsley. The information on this website is the copyright property of Peter Hemsley. Coeur du Bois and The
ToolPost are trading styles of Peter Hemsley. Whilst reasonable efforts are made to ensure the accuracy of information presented, no liability can be accepted for errors in this information nor for
contingencies arising therefrom. If you are inexperienced in any aspect of woodworking, we would strongly counsel that you take a course of formal instruction before commencing to practice |
|