|
|
 |
|
|
 |
|
|
|
The Wivamac DB1000 is a free-standing lathe of impressive capability suitable for advanced amateur turners looking to move up to a fully
professional-quality lathe and for professional turners who do not engage extensively in very long spindle work..This superb lathe is available either with a four-speed drive system using stepped pulleys and a
poly-vee-belt, with either single- or three-phase motor, or with the infinitely variable and reversible Vario electronic motor control system, illustrated above, driving through a four-speed poly-vee-belt
transmission, giving excellent torque characteristics over a very wide speed range. The three-phase and vario versions may optionally be specified with a 1.5 kW / 2 HP motor. See the specification table, below, for more details.The headstock
swivels/rotates freely as well as being fully mobile laterally, enabling positioning anywhere along the length of the lathe bed, to suit the workpiece. An exceptionally stable bowl-turning attachment is also
available to permit the turning of projects right up to the lathe's capacity of well over two metres diameter! Even over the bed, items of up to more than half a metre (520 mm/20.5") diameter can be
accommodated. That's what one can really call c-a-p-a-c-i-t-y! The DB1000 is truly a lathe to move your ambition and your work in stellar directions. And that's before we mention the
fantastic range of accessories available to permit ornamental turning, copying, fluting and similar applications, turning this lathe into a lathe system unsurpassed in its marketplace.
Details of individual components may be found on the
Technical Specifications page. |
|
|
|
Wivamac DB1000 Lathe Technical Specifications |
|
Capacity (between centres) |
900 mm / 35.4" |
Capacity (diameter over bed) |
520 mm / 20.47" |
Centre Height (over bed/floor) |
260 mm / 10.23" (1150 mm / 45.25") |
Spindle |
Diameter |
30 mm / 1.18" |
Morse taper |
2 MT |
Throat bore |
10 mm / 0.39" |
Thread |
M33 x 3.5mm |
Indexing |
24 position indexing with sprung detent pin location |
Spindle Lock |
Yes: independent pin locking directly into spindle |
Tailstock |
Diameter |
40 mm / 1.57" |
Morse taper |
2 MT |
Throat bore |
10 mm / 0.39" |
Quill travel |
110 mm / 4.33" |
Motor |
750 W / 1 HP OR 1.5 kW / 2HP, 1440 rev/min |
Drive Speeds |
Standard Drive |
Vario Drive |
(4 - speed pulley) |
(4 step pulley) |
400 |
120-480 |
800 |
240-960 |
1500 |
450-1800 |
2500 |
750-3000 |
Dimensions (L x W x H) |
1750 x 700 x 1260 mm / 60.9" x 27.56" x 49.61" |
Weight (without ballast) approx. |
150 kg / 330 lbs |
|
|
|
|
Wivamac DB1000 Lathe Selection Chart & Order Form |
|
Use this table to select the most suitable lathe model and acessories to suit your needs. Click in the box in
the rightmost column to add an item to your configuration (click it again if you wish to remove the item). At all times the price* of the chosen configuration will be displayed in the
box at the foot of the table. You may choose to pay for your lathe outright for processing immediately, or place a holding deposit of 10% with the balance of charges being paid prior to
delivery. The relevant deposit payable is also shown at the foot of this table. Links in the left-hand column provide further details of some items. |
|
Ref. |
Description |
*Price (£) |
ü
to
Add |
Woodturning lathes have M33 x 3.5 mm threaded spindle with 24 position indexing,
bored 2 MT, cast iron tailstock bored 2 MT, and are supplied complete with 4-prong drive centre; live tail centre, 8 mm dia. knock-out bar; 300 mm cast iron toolrest mounted in variable offset banjo;
spindle locking pin, toolkit and Users Manual. The lathe headstock is fully free to swivel and traverse the lathe bed for optimum positioning to suit any job. |
DB1000m |
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 900 mm
centres, centre height 260 mm/1150 mm over floor, 220 volt 1 Ph. 0.75 kW (1 HP) motor, 4-speed poly-vee-belt drive and reversing switch. |
£1618.87 |
|
DB1000d |
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 900 mm centres, centre height 260 mm/1150 mm
over floor, 220/380 volt 3 Ph. 0.75 kW (1 HP) motor, 4-speed poly-vee-belt drive and reversing switch. |
£1582.50 |
|
DB1000d-2 |
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 900 mm centres, centre height 260 mm/1150 mm
over floor, 220/380 volt 3 Ph. 1.5 kW (2 HP) motor, 4-speed poly-vee-belt drive and reversing switch. |
£1617.22 |
|
DB1000vario |
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 900 mm centres, centre height 260 mm/1150 mm
over floor, 220 volt 1 Ph. 0.75 kW (1 HP) motor with VARIO electronic variable speed control, 4-speed poly-vee-belt drive. Vario controller installed in steel cabinet mounted on inside of left hand
pedestal of lathe bed. (as photograph, above) |
£1970.26 |
|
DB1000vario
CB |
Woodturning lathe, as DB1000vario above, but with main controls mounted in magnetically-backed remote control panel.
|
£2038.06 |
|
DB1000
vario-2 |
Woodturning lathe, c/w floor-mounted, height-adjustable A-frame stand, 900 mm centres, centre height 260
mm/1150 mm over floor, 220 volt 1 Ph. 1.5 kW (2 HP) motor with VARIO electronic variable speed control, 4-speed poly-vee-belt drive. Vario controller installed in steel cabinet mounted on inside of
left hand pedestal of lathe bed. (as photograph, above) |
£2107.51 |
|
DB1000
vario-2CB |
Woodturning lathe, as DB1000vario-2 above, but with main controls mounted in magnetically-backed remote
control panel. |
£2175.31 |
|
Accessories |
DB1020S
|
Bowl Turning Attachment providing supplementary underslung bed perpendicular to main bed for easier access to larger
workpieces (up to ~1000mm/40" dia.) when working with the headstock rotated. Includes adjustable front leg, toolpost extender and mounting hardware. |
£221.41 |
|
DB0010 |
Headstock alignment system, facilitating aligning head- and tail-stock. |
£31.42 |
|
DB1210-1" |
Offset extension adaptor for tool rest, 1" socket. |
£37.21 |
|
DB1220
|
Three-point steady, fully adjustable. |
£189.34 |
|
DB1240
|
Sphere turning jig, c/w centre finder and HSS cutter. For creating spheres up
to 190 mm diameter. |
£222.41 |
|
DB1240HR |
Sphere turning jig, c/w centre finder and gouge-profile cutter. For creating spheres up to 190 mm diameter.
|
£263.75 |
|
DB1241 |
Sphere turning jig, with micro-adjustment; c/w centre finder and HSS cutter. For creating spheres up to 190 mm
dia. |
£311.70 |
|
DB1270-1" |
Camlock toolrest bracket ("banjo"), with variable stem offset facility,
steel. - supplied as standard equipment. For 1" stem toolrests. |
£173.63 |
|
DB1261-1" |
Toolrest, 150 mm, cast iron, 1" stem |
£36.38 |
|
DB1262-1" |
Toolrest, 300 mm, cast iron, 1" stem- supplied as standard equipment. |
£36.38 |
|
DB1263-1" |
Toolrest, 600 mm, steel, dual post design, 1" stem.(requires additional DB1260-1"
toolrest bracket) |
£66.97 |
|
DB1264-1" |
Internal bowl turning toolrest, fabricated steel "J"-shape, 1" stem |
£33.07 |
|
DB1251-1" |
Toolrest, 100 mm , steel, 1" stem |
£44.65 |
|
DB1254-1" |
Toolrest, 250 mm , steel, 1" stem |
£52.09 |
|
Compound Table & Ornamental Turning System |
DB1410 |
Compound Table with toolrest socket |
£238.95 |
|
DB1420 |
Ornamental turning device comprising cutter head with toolholder for spindle
mounting and indexable auxilliary spindle, threaded M33 x 3.5 mm for mounting in toolrest socket. |
£208.35 |
|
DB1430 |
Thread cutting jig to mount in toolrest socket, spindle threaded M33 x 2 mm pitch,
c/w 60 deg. TC cutter, 8 mm shank. |
£124.02 |
|
DB1440 |
Tool support, bored 43 mm dia. To clamp onto standard 43 mm collar on routers and
power drills. Mounts in toolrest socket. |
£30.59 |
|
GSG2175 |
Alternate leadscrew for DB1430, 1.75 mm pitch. |
£24.80 |
|
GSG2250 |
Alternate leadscrew for DB1430, 2.5 mm pitch. |
£24.80 |
|
GSG2350 |
Alternate leadscrew for DB1430, 3.5 mm pitch. |
£38.03 |
|
TPC3412 |
3/4" x 60 deg., 3/8 inch shank, 12 tooth cobalt HSS threading cutter for DB1430 |
£20.67 |
|
GSG201 |
19 mm x 60 deg., 8 mm shank, 3-lobed TC threading cutter for DB1430 |
£28.94 |
|
GSG2011 |
Replacement cutter tip for GSG201 cutter |
£19.84 |
|
GSG200 |
Stand-alone threading device utilising DB1430 on free-standing base unit. Requires router with 8 mm collet and
43 mm diameter mounting collar (not supplied). |
£349.74 |
|
|
|
|
|
You can choose to pay for your lathe in full, right away, or place a 10% holding deposit. Click the
appropriate button, below, to indicate your choice and place this configuration in your shopping basket (that's one big basket!) |
|
|
|
10% Deposit* on this lathe £ |
|
|
|
|
|
NB: Prices quoted in pounds sterling (£).
*Value Added Tax will be added to invoices to EU residents |
|
|
|
|
|
©1997-2008 P. Hemsley. The information on this website is the copyright property of Peter Hemsley. Coeur du Bois and The
ToolPost are trading styles of Peter Hemsley. Whilst reasonable efforts are made to ensure the accuracy of information presented, no liability can be accepted for errors in this information nor for
contingencies arising therefrom. If you are inexperienced in any aspect of woodworking, we would strongly counsel that you take a course of formal instruction before commencing to practice |
|