Home
WivaMac
 Lathes
Killinger
 Lathes
Oneway_Lathe
VB Master
 Bowlturner
Steinert
 Lathes
Picture

Killinger Woodturning Lathes

Killinger 1400SE Woodturning lathe on optional standKillinger lathes are built to the high standard you would expect from a company based in Munich, Germany.Our experience with these lathes has left us with a very positive impression and the value offered by the lathes is truly quite remarkable.

A range of models is available catering for most points within the user spectrum and a comprehensive range of accessory and supporting products is available to cater for almost every turning need. The range includes both bench-mounted versions and, of course, floor standing models.

We are pleased to have typical lathes for your trial and examination in our shop and we would highly recommend that you review these lathes carefully: we think that you will be very pleasantly surprised.

Of course, we will be happy to provide more information upon receipt of your telephone call or email - though we believe that the opportunity to discus your needs almost always leads to a better buying decision as we are more than happy to give guidance and to share our experience.

Killinger 1400SE Woodturning Lathe

Killinger 1400SE Lathe - Outline Specifications

Capacity

:

Swing over bed: 360mm
Centre height: 180mm
Between centres (standard): 760mm
Between Centres (with optional extension): 1200mm
Swing over optional bowl turning attachment: 650mm

Drive

:

1 HP fully variable speed motor with inverter control driving through 2-step pulleys to give infinitely variable speed range from 60-3125 rev/min. Fully reversible drive.

Controls

:

Movable magnetic-backed control box with speed regulator, Run/Stop buttons and Forward/Reverse switch. Emergency stop button on headstock. Digital speed indicator built into headstock.

Headstock

:

Headstock rotates to any position and can also be locked in 5 different pre-set detented positions. 36-position indexing and independent spindle lock. Safety cut-out switch on belt cover. Spindle bored through 10mm. Spindle thread M33 x 3.5mm to DIN800, with MT2 throat. Precision alignment system for setting spindle alignment.

Tailstock

:

Tailstock bored 10mm, 2MT throat. 70mm stroke with calibrated quill. Self-ejecting with standard centres and other MT equipment. Camlock bed clamping.

Mounting

:

Available in bench- or stand-mounted versions.

Accessories

:

Supplied with 350mm toolrest (14 inch); 4-prong drive centre, live centre, knockout bar, instruction manual.

Dimensions

:

Overall length: 1350mm; bed length: 1150mm
Weight, bench model: 96kg; Weight with optional stand: 166kg

Primary Options

:

Large bowl turning attachment (outrigger) with support leg;cast iron floor stand; sphere turning attachment, 450mm bed extension and many others

Other

:

Full cast iron build, precision machined. Camlock banjo with 30mm toolpost socket.

 

Killinger 1450SE Woodturning Lathe

Killinger KM1450SE woodturning lathe with floor stand

Killinger 1450SE Lathe - Outline Specifications

Capacity

:

Swing over bed: 400mm
Centre height: 200mm
Between centres (standard): 710mm
Between Centres (with optional extension): 1160mm
Swing over optional bowl turning attachment: 660mm

Drive

:

2 HP fully variable speed motor with inverter control driving through 3-step pulleys to give infinitely variable speed range from 40-3035 rev/min. Fully reversible drive.

Controls

:

Movable magnetic-backed control box with speed regulator, Run/Stop buttons and Forward/Reverse switch. Emergency stop button on headstock. Digital speed indicator built into headstock.

Headstock

:

Headstock can be positioned anywhere on the lathe bed, rotates to any position and can also be locked in 6 different pre-set detented positions. 36-position indexing and independent spindle lock. Safety cut-out switch on belt cover. Spindle bored through 10mm. Spindle thread M33 x 3.5mm to DIN800, with MT2 throat. Precision alignment system for setting spindle alignment.

Tailstock

:

Tailstock bored 10mm, 2MT throat. 100mm stroke with calibrated quill. Self-ejecting with standard centres and other MT equipment. Camlock bed clamping.

Mounting

:

Available in bench- or stand-mounted versions.

Accessories

:

Supplied with 350mm toolrest (14 inch); 4-prong drive centre, live centre, knockout bar, instruction manual.

Dimensions

:

Overall length: 1450mm; bed length: 1150mm
Weight, bench model: 110kg; Weight with optional stand: 180kg

Primary Options

:

Large bowl turning attachment (outrigger) with support leg;cast iron floor stand; sphere turning attachment, 450mm bed extension, copying attachments and many others

Other

:

Full cast iron build, precision machined. Camlock banjo with 30mm toolpost socket.

 

Killinger 1500SE Woodturning Lathe

Killinger KM1500SE woodturning lathe

Killinger 1500SE Lathe - Outline Specifications

Capacity

:

Swing over bed: 400mm
Centre height: 200mm
Between centres (standard): 1100mm
Between Centres (with optional extension): 2600mm
Swing over optional bowl turning attachment: 660mm

Drive

:

2 HP fully variable speed motor with inverter control driving through 3-step pulleys to give infinitely variable speed range from 40-3035 rev/min. Fully reversible drive.

Controls

:

Movable magnetic-backed control box with speed regulator, Run/Stop buttons and Forward/Reverse switch. Emergency stop button on headstock. Digital speed indicator built into headstock.

Headstock

:

Headstock rotates to any position and can also be locked in 6 different pre-set detented positions. 36-position indexing and independent spindle lock. Safety cut-out switch on belt cover. Spindle bored through 10mm. Spindle thread M33 x 3.5mm to DIN800, with MT2 throat. Precision alignment system for setting spindle alignment.

Tailstock

:

Tailstock bored 10mm, 2MT throat. 100mm stroke with calibrated quill. Self-ejecting with standard centres and other MT equipment. Camlock bed clamping.

Mounting

:

Supplied complete with robust floor stand.

Accessories

:

Supplied with 350mm toolrest (14 inch); 4-prong drive centre, live centre, knockout bar, tool tray and instruction manual.

Dimensions

:

Overall length: 1930mm; Width (depth): 600mm
Weight complete with stand: 240kg

Primary Options

:

Large bowl turning attachment (outrigger); sphere turning attachment, 450mm and 1500 bed extensions, copying attachments and many others

Other

:

Full cast iron build, precision machined. Camlock banjo with 30mm toolpost socket.

 

Killinger 3100SE Woodturning Lathe

Killinger KM3100SE woodturning lathe

Killinger 3100SE Lathe - Outline Specifications

Capacity

:

Swing over bed: 560mm
Centre height: 280mm
Between centres (standard): 1100mm
Between Centres (with optional extension): 2600mm
Swing over optional bowl turning attachment: 900mm

Drive

:

3 HP fully variable speed motor with inverter control driving through 3-step pulleys to give infinitely variable speed range from 40-3025 rev/min. Fully reversible drive.

Controls

:

Movable magnetic-backed control box with speed regulator, Run/Stop buttons and Forward/Reverse switch. Emergency stop button on headstock. Digital speed indicator built into headstock.

Headstock

:

Headstock rotates to any position and can also be locked in 6 different pre-set detented positions. 36-position indexing and independent spindle lock. Safety cut-out switch on belt cover. Spindle bored through 10mm. Spindle thread M33 x 3.5mm to DIN800, with MT2 throat. Precision alignment system for setting spindle alignment.

Tailstock

:

Tailstock bored 10mm, 2MT throat. 135mm stroke with calibrated quill. Self-ejecting with standard centres and other MT equipment. Camlock bed clamping.

Mounting

:

Supplied complete with robust floor stand.

Accessories

:

Supplied with 350mm toolrest (14 inch); 4-prong drive centre, HD ring centre, live centre, knockout bar, tool tray and instruction manual.

Dimensions

:

Overall length: 1930mm; Width (depth): 600mm
Weight complete with standard stand: 400kg;
Weight with stand and 1500 centre distance: 470kg
Weight with stand and 2300 centre distance: 550kg

Primary Options

:

Large bowl turning attachment (outrigger); sphere turning attachment, 450mm and 1500 bed extensions, copying attachments and many others

Other

:

Full cast iron build, precision machined. Camlock banjo with 30mm toolpost socket.

 

*NB: Prices quoted in pounds sterling. 
Value Added Tax will be added to invoices to EU residents unless
a valid VAT registration number is quoted when ordering.

Review Current Basket Contents 

1997-2017 P. Hemsley.  The information on this website is the copyright property of Peter Hemsley. 
Coeur du Bois and The ToolPost are trading styles of Peter Hemsley.  Whilst reasonable efforts are made to ensure the accuracy of information presented, no liability can be accepted for errors in this information nor for contingencies arising therefrom.  If you are inexperienced in any aspect of woodworking, we would strongly counsel that you take a course of formal instruction before commencing to practice